Click To Call(727) 474-1551Click To Get A Free Estimate
Dark even sealed paver driveway leading to a garage in a Clearwater neighborhood

A driveway that holds color under sun and tires

Driveway Paver Sealing in Clearwater, FL

Call (727) 474-1551 for a free driveway paver sealing estimate in Clearwater.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(727) 474-1551
Driveways

Is driveway paver sealing available at my Clearwater address?

Driveway paver sealing is open to homes in Clearwater, FL, and a local contractor replies within 1 business day, usually in far less time. There is no charge for the estimate and no pressure to book. To start, call (727) 474-1551.

The driveway is the first thing a visitor sees and the hardest working paved surface on the lot. Hot tires, dripping oil, a garage door that shades one end and sun that bakes the other all show up in the color. A wash, fresh sand in the joints and a coat of sealer bring it back to one even tone. Give the size and say whether a car sits on it daily, then ask for a free estimate.

Call (727) 474-1551

How it works

What is the process for sealing a paver driveway in Clearwater?

What steps does the Clearwater driveway process follow?

The process starts well before any sealer is opened, and the order protects the result. Premier Coatings, a Pinellas County company, lists cleaning, algaecide, a rinse, new silica sand, a final sweep and a flood coat. To hear how your drive would be handled, call (727) 474-1551.

What is easy to forget at the street?

Clearwater drives often have a walk and an apron at the street that are easy to forget. Ask whether those are in the price, and whether the contractor will cover the garage door and the plants along the edge. Written scope beats a handshake, so ask for a free estimate and compare it with the bids you have.

Start at the garage

Work moves out toward the street so no one walks across wet sealer.

Joint sand is compacted

Premier Coatings says a vibrating plate packs silica sand into the joints.

One session for the coat

Unilock says sealing in one session avoids gloss changes where layers overlap.

Sealer being rolled across the apron of a paver driveway at a Clearwater garage

What do hot tires, oil drips and sprinklers do to a Clearwater driveway?

What marks do tires, oil and sprinklers leave in Clearwater?

Each leaves its own mark. Tires turning in place scuff the surface and loosen the joints at the curve. Oil soaks into unsealed stone and leaves a dark patch. Rusty's Pro Wash & Seal says irrigation heads cause local wear along driveways and walkways, and iron in some irrigation water leaves orange streaks. To have a stain looked over, call (727) 474-1551.

Does sealing stop oil stains?

Sealing does not make oil harmless, but it slows how fast a drip soaks in, which gives a day to wipe it up. The better habit is a quick rinse of the spot after a leak. Ask the contractor how stains are treated before the coat when you ask for a free estimate.

How long before I can park on my newly sealed driveway?

When can Clearwater families walk and park on it?

Walking is the easy part. Premier Coatings allows light foot traffic after a few hours and says to keep vehicles off for 24 to 48 hours, while Rusty's Pro Wash & Seal says 48 to 72 hours before cars return. Unilock adds up to 48 hours of dry weather for the coat to cure. To plan where the cars go, call (727) 474-1551.

How do I plan the parking gap?

A good plan includes a day of street parking and a word to the neighbors. Also keep sprinklers off, because Unilock says water on a fresh coat can leave white marks. Tell the contractor your timing when you ask for a free estimate.

Pricing

How much does driveway paver sealing cost in Clearwater?

What does a 1,000 square foot driveway cost in Clearwater?

The 1,000 square foot driveway is the one price Rusty's Pro Wash & Seal states directly, at $1,250 to $2,500, from its Tampa Bay range of $1.25 to $2.50 per square foot. Its Clearwater page lists $1.00 to $1.75 for most homes. Oil, algae, low joints and old coating change the number. For a price at your address, ask for a free estimate.

How should I compare bids?

Because no page prices a driveway of every shape, the table below scales the published range by area. A driveway in full sun leans toward reseal at about 3 years, so a cheaper coat that lasts less time can cost more per year. Compare bids on that basis, or call (727) 474-1551.

Driveway sizeTypical exampleWash, sand and seal
600 sq ftTwo car driveway$750 to $1,500
1,000 sq ftWide driveway with a turnaround$1,250 to $2,500
1,400 sq ftLong drive plus front walk$1,750 to $3,500
2,000 sq ftCircular drive and entry court$2,500 to $5,000

Math uses the $1.25 to $2.50 per square foot Tampa Bay range, which Rusty's Pro Wash & Seal applies to a 1,000 square foot driveway at $1,250 to $2,500. Its Clearwater page gives $1.00 to $1.75 for most local homes. Stripping failed coating, oil removal and resetting sunken stones are quoted separately.

Get a Free Estimate

When is it time to reseal a Clearwater driveway?

What are the signs of a worn coat on a Clearwater drive?

Watch for four signs. Water stops beading and darkens the stone, color looks flat, joint sand sits low after rain, and a white haze or green film comes back quickly. Premier Coatings says two or more signs mean cleaning, sanding and resealing. Spot something? Call (727) 474-1551.

How soon is too late?

The calendar gives a second check. Rusty's Pro Wash & Seal says driveways in full sun need attention nearer 3 years, and Premier Coatings puts Pinellas homes at 2 to 3. Waiting past the signs can turn a reseal into a strip and reseal, which costs more. To book a check, ask for a free estimate.

Will an HOA or a shared driveway change how I seal in Clearwater?

Do Clearwater HOA rules affect the finish?

Condo associations and planned communities in Clearwater can set rules for finish and timing, and Rusty's Pro Wash & Seal says it works with condo associations. Read your rules for sheen limits and notice periods before you pick a gloss level. Share them when you ask for a free estimate.

Where does the rinse water go?

Pinellas is the most densely populated county in Florida at about 3,348 people per square mile, according to Wikipedia, so lots are close and a rinse can drift toward a neighbor or a street drain. Ask where the wash water goes and how plants and fences are covered. To raise either question, call (727) 474-1551.

Which sealer type holds up on a busy Clearwater driveway?

When does solvent-based sealer make sense in Clearwater?

Unilock says solvent-based sealer suits high shine finishes and high traffic areas, lasts about four to five years when kept up and covers roughly 80 to 120 square feet a gallon. A driveway that sees daily tires fits that description. To ask whether it fits yours, call (727) 474-1551.

When does water-based sealer make sense?

Unilock says water-based sealer suits matte and lower gloss finishes, has low odor, can help hold joint sand and covers about 100 to 150 square feet a gallon. It makes sense where a calmer look is wanted or an HOA limits shine. Name your preference when you ask for a free estimate.

Can sealer types be mixed over the old coat?

Not safely. Alliance Gator, a sealer maker, says solvent-based product must be followed by solvent-based later, while water-based can be followed by either. Ask the contractor to identify what is on the driveway before quoting. To raise it, call (727) 474-1551.

How should I get ready for driveway paver sealing in Clearwater?

Where do the cars go during a Clearwater driveway job?

Every vehicle has to be off the paved area, garage included, until the coat has set. Premier Coatings says most driveways take a single day and larger ones 1.5 to 2 days, so plan street parking or a driveway at a friend's house for that span. Tell the contractor the dates that suit you when you ask for a free estimate.

Who pauses the sprinklers?

Unilock says automatic sprinklers should stay off while the coat dries, because water on it can leave white marks. Decide beforehand whether the owner or the contractor turns off the timer, and for how long. Questions about the timer? Call (727) 474-1551.

What about plants, fences and the garage door?

Shrubs along the edge, a wooden fence and the garage door all take overspray and wash water if left bare. A good plan covers them before any washing begins. Ask what the contractor uses to protect them when you ask for a free estimate.

Do the neighbors need a heads up?

A fresh coat is wet and slick for hours, and a curious child or a delivery driver can leave a footprint. A note on the door or a word to the next house keeps the finish clean. To talk through a plan for a close set of lots, call (727) 474-1551.

Wide paver driveway with a clean even finish beside a trimmed Clearwater lawn
Paver walkway and driveway edge beside a Clearwater lanai after a wash and sealer coat

What should a written Clearwater driveway estimate include?

Does the Clearwater quote name the area and the finish?

A useful estimate for a Clearwater driveway lists the square footage, the finish and the product by name. Premier Coatings, a Pinellas County company says its written estimates are based on square footage, condition, edges and steps. A line that only says sealing hides too much. Ask for the detail when you ask for a free estimate.

Does it say what happens to stained or low pavers?

Stain treatment, resetting stones and stripping failed coating are separate jobs. The paver restoration and paver stain removal pages explain each. Have the contractor price them apart from the coat, or call (727) 474-1551.

Is the walk, apron and edge included?

Clearwater driveways usually run into a front walk, an apron at the street or a strip along the garage. Those pieces count as paved area, so confirm they are in the price. If you also want the lanai or back patio done, see the patio paver sealing page, then ask for a free estimate.

Can neighbors in the same area share a visit?

A contractor who works the Pinellas side often passes several streets in a day, and towns such as Lealman and East Lake have their own pages. Ask whether a nearby date is open when you call (727) 474-1551.

Photos

How do sealed driveways look around Clearwater?

Freshly sealed paver driveway in a Clearwater subdivision
Sealed paver pool deck in a Clearwater subdivision
Sealed paver patio behind the home in a Clearwater subdivision
Sealed paver walkway to a front door in a Clearwater subdivision
Close view of freshly sealed pavers in a Clearwater subdivision
Paver area with one cleaned half beside a dirty half in a Clearwater subdivision
Contractor cleaning pavers in a Clearwater subdivision
Contractor sealing or sanding pavers in a Clearwater subdivision
Questions

What do Clearwater homeowners ask about driveway sealing?

What should I clean pavers with before sealing?

The cleaner depends on the mark. Rusty's Pro Wash & Seal lists pressure washing, mold and algae treatment, oil treatment and rust treatment as the usual preparation, done as needed. A driveway often needs more than one product, which is why a contractor tests a small patch first.

What are the downsides of sealing a paver driveway?

The coat is a repeat cost, and a high gloss can feel slick when wet. Sealer put over damp or dirty stone can cloud or hold the stain underneath. Choosing the finish for the surface and waiting for dry weather avoids most of those problems.

How often should I seal pavers in Florida?

Rusty's Pro Wash & Seal says 3 to 5 years, with a driveway in full sun nearer 3. Premier Coatings, a Pinellas County company, says most Pinellas homeowners should plan on 2 to 3 years and about 2 where sun and salt spray are heavy.

Why is paver sealing so expensive?

Most of the bill is labor before the coat: washing, stain treatment, joint sand and drying time. Rusty's Pro Wash & Seal says the condition of the surface moves the price more than the paver material. Small driveways can also hit a $500 to $1,000 minimum charge.

How long until I can park on a freshly sealed driveway?

Premier Coatings says avoid vehicles for 24 to 48 hours. Rusty's Pro Wash & Seal says 48 to 72 hours, and Unilock adds up to 48 hours of dry weather. Ask which window your contractor uses and park on the street until it ends.

Will oil drips and tire marks come out before sealing?

Many do, but old oil that soaked deep may leave a shadow. Treating the spot before the coat matters, because sealer over oil locks it in. The paver stain removal page covers marks in more detail.

Can sprinkler heads along my driveway damage the sealer?

They can wear one spot. Rusty's Pro Wash & Seal says irrigation heads cause localized wear on driveways and walkways, and Unilock says sprinklers must stay off while a coat dries. Aiming heads at the lawn is a fix worth asking about.

Why do the edges of my paver driveway turn green along the lawn?

Lawn edges stay damp from sprinklers and shade, and algae grows wherever stone stays wet. Rusty's Pro Wash & Seal says humidity fuels mold and algae around Tampa Bay. A wash and a coat slow the return, and re-aiming heads that spray the stone helps too.

Does sealing make a paver driveway slippery?

It can if the finish is glossy and the stone is wet. Unilock says high gloss sealers may increase slipperiness, especially when wet, and calls matte the safer pick. On a sloped driveway, ask for a calmer finish.

Does my HOA need to approve a sealed driveway finish?

Rules differ by community, and the contractor cannot read your association documents for you. Check the paint and finish section of your HOA rules, and choose a natural or satin finish if the rules call for no new gloss.

Where around Clearwater can I request a driveway estimate?

Driveway work is available in Clearwater and across the towns below. Each page has notes for that area, and (727) 474-1551 takes calls from any of them.

Want the driveway to look cared for from the street?

Share the size and what you notice now. A local contractor writes back within 1 business day, often sooner, with no charge for looking.

Call (727) 474-1551

Free, no obligation